Item 108703 - Chester Nickerson making snow fence, Hodgdon, 1950

Item 108703 - Chester Nickerson making snow fence, Hodgdon, 1950
Contributed by Aroostook County Historical and Art Museum
Item 108703
Chester Nickerson making snow fence, Hodgdon, 1950
Zoom
4495px x 3265px - 15.0"w x 10.9"h @ 300dpi  |  Need a larger size?
*Credit line must read: Collections of Aroostook County Historical and Art Museum
Image Info

Chester Nickerson of Hodgdon operated his homemade snow fence machine which he did in his spare time during the winter months.

He fabricated the machine himself in 1942 after selling his old one. He built the machine in his mind during the evenings first, then he gathered parts. Old Ford wheels with the tires still on, discarded drive sprockets off a potato digger, parts of an oil drum cut into spools to hold his wire, bits of iron wagon wheels, springs, shims, cogs, and chains. When completed his out of pocket expense was $1.20.
The snow-fence machine was powered by a two-horse power electric motor with an old Model A transmission.

He bought laths from nearby sawmills for $7.00 dollars per 1000 and could make 50 ft of fencing in 12 minutes. He sold the snow fence to the Maine Highway Department for .15 cents per foot. The Highway Department said it the best fence they could buy.

Snow fence was placed parallel with the roadway and would cause turbulence in the wind so the snow would drop by the fence rather than drift across the road producing a safety hazard.

Show Details